Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the center console and the gear knob on the Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Body

In this video we can see how to disassemble the central console and the gear knob on the Kia Sportage: we start by removing the partition in the driver's footwell, which can be done by levering with a screwdriver or (better) with a plastic spatula. We do the same on the passenger side. We remove the gear shift boot with the knob, simply by pulling it up forcefully. We lever on the inside of the cup holder so that we can remove the entire part, then we open the armrest, and inside we find four screws to remove, and one on each side from the outside. We also remove the screws from the storage compartment at the base of the radio and remove it, being careful with the electrical connectors. We remove the screws under the radio controls and remove the entire outer part of the console. Job done.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Knob of the Automatic Gear Lever on the Kia Sportage
Replacing the Gear Knob of the Automatic Gear Lever on the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Following today's instructions, learn how to remove and replace the gear knob of the automatic gear lever on the Kia Sportage. First, get inside the …
Replacement of the gear shift knob of the Kia Sportage
Replacement of the gear shift knob of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In a few simple steps, we will see how to disassemble and replace the knob of the automatic transmission lever of the Kia Sportage. First, we get int…
How to replace the gear knob in the KIA Sportage?
Kia Sportage (2010-2016 / SL, MK 3) In this tutorial we can see how to replace the gear knob in the KIA Sportage, an extremely simple and quick operation. First of all, let's go inside …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos