Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Fan Resistor on a Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Blower motor

Learn how to replace the fan resistor on a Kia Rio. First, remove the plastic or cloth cover under the front dashboard using a lever. Use a screwdriver to unscrew the cover (where the resistor is located). Disconnect the large connector from the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the proper installation of the previously mounted parts and test their correct operation.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Rio (2011-2017 / UB, MK 3) If you intend to replace the cabin air filter on your Kia Rio third generation yourself, follow the steps described below. First, ensure you have a n…
Kia Rio (2011-2017 / UB, MK 3) To find the box containing all the cabin fuses inside your Kia Rio Mk3, you just need to follow the steps described in our new guide addressed to you…
Kia Rio (2011-2017 / UB, MK 3) Before you can start, open the rear doors of your Kia Rio. Then, enter the cabin. This will allow you to reach the clips that hold the rear seats in …

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos