Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : How to extract the rear stops in the Kia Sportage.

Kia Sportage - Video tutorial

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Tail light
Operation: How to extract the rear stops in the Kia Sportage.

How should we do (to safeguard the operator's safety) whenever there is any maintenance operation to be performed on a car, even in this case, we arrange our Kia Sportage on the deck or on a floor, so that we can work on it above in conditions of safety and stability. Once this is done, we open the tailgate of the rear luggage compartment and, using a small crowbar, we pry the perimeter of the protection placed between the headlight and the tailgate and remove it. Now, using a screwdriver, unscrew the two screws that we find below and that fix the headlight block in place. Then, remove the same from its seat, possibly, using the screwdriver to leverage. We disconnect the power supply and that's it!


Posted on 30 December 2023 by ScegliAuto



How to remove the rear light bulb of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before we begin, we will have to open the tailgate of our Kia Sportage. So let's start by unscrewing and removing the screws that secure the rear lig
Where is the fuse box of the new Kia Sportage Hybrid located?
Kia Sportage (2021-2024 / NQ5, MK 5) In this new guide dedicated to the new Kia Sportage Hybrid, we will discover where the box containing all the fuses of your new Kia Sportage Hybrid i
How to remove the rear seats on the Kia Sportage MK3
Kia Sportage (2010-2016 / SL, MK 3) Let's find out in this video how to remove the rear seats on the Kia Sportage third series, following the instructions below. First of all we open th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos