Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Blades on a Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

Do you want to replace the wiper blades? Here’s how to change the wiper blades on a Kia Rio. Pull the wiper arm (gently to avoid breaking it) and slide it off the arm on the left. Fit the new blade onto the arm (if the blade is not original, you need to detach the adaptive piece), you will hear a click when the piece is securely attached.

Lower the wiper arm onto the windscreen and perform the same operation on the second blade on the other side. Operate the wipers using the control levers until you confirm they are functioning correctly.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located in the Kia Rio?
Where Are the Fuses Located in the Kia Rio?
Kia Rio (2011-2017 / UB, MK 3) The fuses in the Kia Rio are located inside one of the designated fuse boxes installed in the vehicle: in this type of car, you will find two boxes t…
Removing Wiper Blades on Kia Rio
Removing Wiper Blades on Kia Rio
Kia Rio (2017-2023 / ) Lift the rear wiper arm and, using both hands, bend the end outward and snap it forcefully at the midpoint: this will be enough to detach the blade. …
How to Replace the Cabin Air Filter on a Kia Rio 3
How to Replace the Cabin Air Filter on a Kia Rio 3
Kia Rio (2011-2017 / UB, MK 3) If you intend to replace the cabin air filter on your Kia Rio third generation yourself, follow the steps described below. First, ensure you have a n…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos