Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set Up the Tyre Pressure Monitoring System on a Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

To set up the tyre pressure monitoring system on a Kia Rio, you need to follow a precise procedure. First, inflate the tyres to the recommended pressure, then start the car. Now press the TPMS button (SET!) for at least three seconds; the warning light will flash on the display and will turn off after a few moments.

If the light does not flash, repeat the procedure by pressing the TPMS button again. The warning light illuminates on the dashboard when one or more tyres are under-inflated after setting the TPMS.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Resetting the tyre pressure warning light on the Kia Rio
Resetting the tyre pressure warning light on the Kia Rio
Kia Rio (2016-2023 / MK 4, SC, YB) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
How to reset the tyre pressure warning light on a Kia Rio?
How to reset the tyre pressure warning light on a Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure warning light on a Kia Rio, inflate the tyres to the recommended pressure value: these values are listed on the sticker at…
How to Reset the Tyre Pressure Light on a KIA Rio
How to Reset the Tyre Pressure Light on a KIA Rio
Kia Rio (2016-2023 / MK 4, SC, YB) In this tutorial, we will see how to reset the tyre pressure light on a KIA Rio, a very simple and quick operation to be performed only after restori…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos