Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Kia Seltos?

Model: Kia Seltos MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

See other generations:
Video tutorial

To replace the rear bumper on a Kia Seltos, loosen the screws that secure it, located inside the wheel wells of the rear wheels. Once these screws are loosened, remove the screws at the bottom of the bumper and then open the trunk.

After loosening the screws under the black panel, you can remove the bumper after disconnecting the connectors underneath. This will allow you to install the new bumper, securing it with the screws removed earlier.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to disassemble the rear headlight of the Kia Seltos
How to disassemble the rear headlight of the Kia Seltos
Kia Seltos (2019-2026 / MK 1) The step-by-step instructions provided in this guide will show us how to disassemble and replace the rear taillight and its bulbs of the Kia Seltos. …
How to Remove the Taillight from a Kia Seltos?
How to Remove the Taillight from a Kia Seltos?
Kia Seltos (2019-2026 / MK 1) Removing the taillight from a Kia Seltos is a task anyone can handle. The taillight is held in place by just two screws, which you can easily see whe…
How to Replace the Front Grille of the Kia Seltos
How to Replace the Front Grille of the Kia Seltos
Kia Seltos (2019-2026 / MK 1) To replace the front grille of the vehicle, follow these steps: open the hood and use a socket wrench to remove the central screw that holds the fron…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos