Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Kia Seltos

Model: Kia Seltos MK 1 - Years 2019-2026
Part: Tail light

The step-by-step instructions provided in this guide will show us how to disassemble and replace the rear taillight and its bulbs of the Kia Seltos. First, we open the rear hatch of the trunk and start unscrewing the fixing screws found on the sides; then we disconnect the electrical connector of the bulbs to remove the headlight, as shown in the video. At this point, we proceed to replace any faulty bulbs with new ones, of the correct type and with the same attachment; we then reassemble the rear taillight, making the electrical connection!

Posted on 1 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the 2022 Kia Seltos
How to reset the TPMS light on the 2022 Kia Seltos
Kia Seltos (2019-2026 / MK 1) If you want to manually reset the TPMS light on your 2022 Kia Seltos, you need to pay attention to the following procedure and follow all the steps. …
How to Remove the Taillight from a Kia Seltos?
How to Remove the Taillight from a Kia Seltos?
Kia Seltos (2019-2026 / MK 1) Removing the taillight from a Kia Seltos is a task anyone can handle. The taillight is held in place by just two screws, which you can easily see whe…
Replacing the Headlight Bulb on the Kia Seltos
Replacing the Headlight Bulb on the Kia Seltos
Kia Seltos (2019-2026 / MK 1) Follow this short and simple guide to replace the headlight bulb on your Kia Seltos. First, open the hood of your car and start by removing the plast…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos