Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the low beam bulb of the Kia Sorento MK2

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Headlight bulb

In today's video we will see the step by step instructions to remove and replace the dipped beam headlight bulb of the Kia Sorento second series. First of all we open the bonnet and remove the plastic protective cover of the bulbs; after which we disconnect the electrical connector of the lamp to remove it and replace it with the new one, after having released the metal clip, as shown in the video. At this point we insert the new bulb, of the right type (in this type H1); then we plug the connector back in and put the lid back on!

Posted on 27 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Kia Sorento
How to replace the headlight bulb of the Kia Sorento
Kia Sorento (2009-2014 / MK 2) If you want to replace the headlight bulb of your second generation Kia Picanto by yourself, all you have to do is follow the steps described in our …
How to replace the headlight bulbs on the Kia Sorento Mk1
How to replace the headlight bulbs on the Kia Sorento Mk1
Kia Sorento (2002-2009 / MK 1) The guide shows how to replace the headlight bulbs of the Kia Sorento Mk1. To perform this operation it is necessary to use a 10 mm socket wrench to …
How to change Kia Sorento headlight bulbs
How to change Kia Sorento headlight bulbs
Kia Sorento (2002-2009 / MK 1) Do we want to replace the rear light of the Kia Sorento? We remove the rear light from inside its body. Lift the tailgate of the luggage compartment …

Other guides you may be interested in

How to Remove the Front Bumper Grille on a Ford Focus

Want to replace the central air grille on your vehicle? Here’s how to remove the front bumper grille on a Ford Focus: using a plastic lever or screwdriver, pry between the bumper plastic and the grille, detach the securing clips located on it. Finally, remove the grille from the centre of the bumper, and compare it with the one that will replace it. To proceed with the installation: secure the grille onto the bumper by engaging the clips (apply pressure with your hands on the grille without breaking it). Check the correct installation of the parts.

Watch the video!


by ScegliAuto

More videos