Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a LED Bulb in the Kia Soluto Interior Dome Light

Model: Kia Pegas Soluto MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Interior dome light bulb

Video tutorial

To install a LED bulb in the interior dome light of the Kia Soluto, first remove the transparent plastic cover from the dome light using a small flathead screwdriver. Next, remove the old bulb and insert the new, easily adaptable device into the corresponding metal contacts.

Position the LED panel in the dome light housing. It is advisable to secure it so that it does not move during vehicle operation.

Finally, after testing the panel's functionality, close the dome light with its plastic cover, ensuring it is correctly inserted into the designated clips.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Position Light Bulb in the Kia Pegas Soluto?
How to Replace the Position Light Bulb in the Kia Pegas Soluto?
Kia Pegas Soluto (2017-2024 / MK 1) The position light bulb in the Kia Pegas Soluto is easily accessible without needing to disassemble any part of the vehicle. To replace it, whether w…
How to Replace the Cabin Air Filter on the Kia Soluto?
How to Replace the Cabin Air Filter on the Kia Soluto?
Kia Pegas Soluto (2017-2024 / MK 1) To replace the cabin air filter on the Kia Soluto, open the glove compartment located on the passenger side. Once it is open, remove the screws that …
How to Replace the Cabin Air Filter on a Kia Soluto?
How to Replace the Cabin Air Filter on a Kia Soluto?
Kia Pegas Soluto (2017-2024 / MK 1) To replace the cabin air filter on a Kia Soluto, open the glove compartment to access the screws that secure it from the inside. By removing these sc…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos