Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How to do a service reset on a Kia Ceed

Kia Cee D - Video tutorial

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Checks and maintenance
Operation: How to do a service reset on a Kia Ceed

We can see in this video tutorial how to reset the service warning light on a second generation Kia Ceed, model in production from 2012 to 2018. Let's start immediately by turning on the instrument panel of the vehicle but without starting it, now press the up arrow key on the steering wheel to scroll through the items on the speedometer information display until you reach the "service" item, here we hold down the "enter" button, also located on the steering wheel under the arrows, for a few seconds to start the reset, and once finished, press the "enter" key again to complete the operation. Finally we restart the vehicle.


Posted on 29 December 2022 by ScegliAuto



How to reset the service light on the Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the se
How to reset the service light on a KIA Ceed?
Kia Cee D (2018-2024 / MK 3, CD) In this tutorial, we can see how to reset the service in the KIA Ceed, an extremely simple and fast operation, to be carried out only after completin
How to service reset a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To reset the work light on your Kia Ceed, first close all doors, then turn the key to the ignition position, but do not start the engine. Use the nav

    Frequently Asked Questions

    • Cee D 2018-2024 - How do you reset the tire pressure warning light on the Kia Ceed? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos