Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on a Kia Ceed 2

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Warning light – error code

Performing the service reset on a second-generation Kia Ceed (2012-2018) is a very simple and quick operation, as shown in today's brief video guide. You can do it independently in just a few seconds after servicing the vehicle. First, turn the key to the first position to power on the instrument cluster, then press the indicators on the steering wheel to scroll through the options on the information display until you reach the maintenance interval option. At this point, press and hold the "enter" button, located under the indicators, until the reset is complete.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Service reset on a Kia Ceed
Service reset on a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Today we will see how to perform a service reset on a second generation Kia Ceed. Let's start the reset procedure by turning on the instrument panel …
How to reset the service light on the 2017 Kia Ceed
How to reset the service light on the 2017 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To correctly complete the manual reset of the service light on your second generation Kia Ceed (year 2017), you must carefully read the following pro…
How to Reset the Service Light on a Kia Ceed
How to Reset the Service Light on a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To reset the service light on a Kia Ceed, first close all doors, then turn the key to the ignition position without starting the engine. Use the navi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos