Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the EPC Warning Light on the Instrument Panel of a Kia C'eed?

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Instrument cluster

In this video, we will see how to turn off the EPC (Electronic Power Control) warning light on the instrument panel of a Kia C'eed: if this light is on and you cannot turn it off, this is a simple way to do it. This light comes on when the battery is slightly low, which is more likely to happen during winter. Turn the steering wheel so that the wheels turn all the way to the right and then all the way to the left, and then straighten them very quickly. This should turn off the light; if it does not, try again quickly, and you can do this even with the engine running. Do this several times until the light goes out.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Low Tyre Pressure Light on a Kia C'eed
How to Reset the Low Tyre Pressure Light on a Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video, see how to reset the low tyre pressure light on a Kia C'eed; the screen indicates low pressure in the rear right tyre. The YouTuber in…
How to Check the Actual Range of the Kia Ceed MK1
How to Check the Actual Range of the Kia Ceed MK1
Kia Cee D (2006-2012 / MK 1) Let's see how to check the actual range on the Kia Ceed MK1: this is a very simple procedure. Insert the key to turn on the ignition without starting…
How to adjust the handbrake of the Kia C'eed
How to adjust the handbrake of the Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to adjust the handbrake of the Kia C'eed: we remove the mat that covers the access to the handbrake adjustment, located in t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos