Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Low Tyre Pressure Light on a Kia C'eed

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Tire pressure warning light

In this video, see how to reset the low tyre pressure light on a Kia C'eed; the screen indicates low pressure in the rear right tyre. The YouTuber inflates the tyre that the system identifies as having low pressure, referring to the recommended tyre pressure provided by the manufacturer, located on the driver's door sill. Once the correct pressure is restored in the indicated tyre, without any further actions, the TPMS warning light, which is the yellow light with a deflated tyre and an exclamation mark in the centre, disappears automatically.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Turn Off the EPC Warning Light on the Instrument Panel of a Kia C'eed?
How to Turn Off the EPC Warning Light on the Instrument Panel of a Kia C'eed?
Kia Cee D (2012-2018 / JD, MK 2) In this video, we will see how to turn off the EPC (Electronic Power Control) warning light on the instrument panel of a Kia C'eed: if this light is …
How to adjust the handbrake of the Kia C'eed
How to adjust the handbrake of the Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to adjust the handbrake of the Kia C'eed: we remove the mat that covers the access to the handbrake adjustment, located in t…
Position and function of the MAP sensor of the Kia C'eed.
Position and function of the MAP sensor of the Kia C'eed.
Kia Cee D (2012-2018 / JD, MK 2) In this video, we see the position of the MAP (Manifold Absolute Pressure) sensor of the Kia C'eed. It is used to measure the absolute pressure in th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos