Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position and function of the MAP sensor of the Kia C'eed.

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Checks and maintenance

In this video, we see the position of the MAP (Manifold Absolute Pressure) sensor of the Kia C'eed. It is used to measure the absolute pressure in the intake manifold, helping the engine control unit regulate the air-fuel mixture, ignition timing, and engine load. In CRDi engines, it is connected to the intercooler, before the throttle valve. The most common causes of failure are dirt, like what we see in the video: sludge that blocks the sensor housing. Another issue can be caused by electrical damage, such as broken wires or oxidized connectors, especially in high-mileage vehicles; the same reason also leads to internal wear, which reduces the sensor's accuracy.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Low Tyre Pressure Light on a Kia C'eed
How to Reset the Low Tyre Pressure Light on a Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video, see how to reset the low tyre pressure light on a Kia C'eed; the screen indicates low pressure in the rear right tyre. The YouTuber in…
How to adjust the handbrake of the Kia C'eed
How to adjust the handbrake of the Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to adjust the handbrake of the Kia C'eed: we remove the mat that covers the access to the handbrake adjustment, located in t…
How to access the hidden menu of the radio on a Kia C'eed to check the software version
How to access the hidden menu of the radio on a Kia C'eed to check the software version
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to access the hidden menu of the Kia C'eed radio, in order to check the software version number installed on our device. Thi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos