Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brakes on a Kia C'eed

Model: Kia Cee D MK 3, CD - Years 2018-2024
Part: Parking brake

In this video, we will see how to replace the rear brakes on Kia C'eed models with electric handbrake. After removing the rear wheels, take out the pin, then use a battery as a buffer and connect it to the motor, allowing it to make a few turns. Now, remove the calipers (it is recommended not to let them hang as shown in the video, as this could damage the circuit), then take out the brake pads and replace them. Refit the calipers and tighten them back in place. Once the caliper is secured, pump the brake, remove the buffer battery from the handbrake, and reconnect the plug.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake of the Kia C'eed
How to adjust the handbrake of the Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to adjust the handbrake of the Kia C'eed: we remove the mat that covers the access to the handbrake adjustment, located in t…
How to Reset the Low Tyre Pressure Light on a Kia C'eed
How to Reset the Low Tyre Pressure Light on a Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video, see how to reset the low tyre pressure light on a Kia C'eed; the screen indicates low pressure in the rear right tyre. The YouTuber in…
Position and function of the MAP sensor of the Kia C'eed.
Position and function of the MAP sensor of the Kia C'eed.
Kia Cee D (2012-2018 / JD, MK 2) In this video, we see the position of the MAP (Manifold Absolute Pressure) sensor of the Kia C'eed. It is used to measure the absolute pressure in th…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos