Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the hidden menu of the radio on a Kia C'eed to check the software version

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Car stereo

In this video we see how to access the hidden menu of the Kia C'eed radio, in order to check the software version number installed on our device. This could be useful in case there are firmware updates. Turn on the ignition and wait for the radio to start, then press and hold the "setup" button and the 5 button simultaneously. Wait for the message "Enable Diag" to appear on the display and release both buttons. At this point, press and hold the "scan" button and 1 button simultaneously and we will see the Software version number appear.

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Actual Range of the Kia Ceed MK1
How to Check the Actual Range of the Kia Ceed MK1
Kia Cee D (2006-2012 / MK 1) Let's see how to check the actual range on the Kia Ceed MK1: this is a very simple procedure. Insert the key to turn on the ignition without starting…
How to adjust the handbrake of the Kia C'eed
How to adjust the handbrake of the Kia C'eed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to adjust the handbrake of the Kia C'eed: we remove the mat that covers the access to the handbrake adjustment, located in t…
How to Replace the Rear Brakes on a Kia C'eed
How to Replace the Rear Brakes on a Kia C'eed
Kia Cee D (2018-2024 / MK 3, CD) In this video, we will see how to replace the rear brakes on Kia C'eed models with electric handbrake. After removing the rear wheels, take out the p…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos