Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Filter on the Kia Quoris K9 K900

Model: Kia Quoris K9 K900 MK 2, RJ - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and its filter on your vehicle, follow the instructions below. First, lift the vehicle and open the hood.

Unscrew the oil filler cap, then locate the oil drain plug underneath the vehicle and remove it. Get a container to collect the used oil and place it on the ground. Wait a few minutes for all the oil to drain out, then screw the drain plug back in securely.

On the side of the oil pan, there is the filter. Remove the filter cap and replace the filter, remembering to change the gasket as well.

Screw the filter cap back on and return to the engine bay to fill the system with new oil.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Kia Quoris K9 K900?
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) To replace the cabin filter in a Kia Quoris K9 K900, open the glove compartment on the passenger side by releasing the pins inside. After removing th…
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) Today, let's look at a known issue regarding the Kia Quoris K900. This is a problem with the alternator that can occur during the vehicle's use. If y…
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) In this vehicle model, all fuses are located within 3 boxes. The first is in the cabin on the left side near the driver's door and is protected by a …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos