|
Do it yourself
| |||
| ||||
How to remove the oil cap from a Kia Sorento
Model: Kia Sorento
MK 2
- Years:
2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this video we can see how to remove the oil pan from a Kia Sorento. First, we lift the car and secure it on jack stands; we empty the oil into a large basin; then we will dispose of it at an authorized center. We remove the splash guard, and then remove the bolts of the oil pan, which are 10 mm; only some are 12 mm. A tip: use tape and a marker to mark the position of each bolt, to avoid confusion during reassembly. On this 2.0 (or 2.4) engine, the air conditioning compressor has a bracket attached to the oil pan, so we must remove it by removing the drive belt, and unscrewing the compressor mounting bolts, but without disconnecting the air conditioning lines, so there is no need to empty the gas. At this point we can detach the oil pan: avoid using a flat screwdriver, as it would damage the sealing surfaces. Clean the surfaces of the engine block and the oil pan from any traces of old silicone and oil; if necessary, use a specific solvent, or an angle grinder with a non-abrasive disc. The operation is not complicated, but it is long and laborious due to the meticulous cleaning required.
Posted on 28 August 2025 by ScegliAuto
Related tutorials
Kia Sorento
(2002-2009 /
MK 1)
How do you change the engine oil of a Kia Sorento? Follow this procedure. Lift the car on a column lift (jack), unscrew the bolt of the oil sump with…
Kia Sorento
(2002-2009 /
MK 1)
Position your car on a column lift and raise it to a comfortable height for disassembly. To change the engine oil, remove the plastic/metal panel loc…
Kia Sorento
(2014-2020 /
MK 3)
To change the engine oil in a Kia Sorento, park the vehicle on a level surface and, if possible, wait until it is slightly warm to aid in draining th…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |