Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a KIA Sportage?

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Door trim panel

As shown in this tutorial, removing the door panel on a KIA Sportage is an extremely simple and quick operation. Start by removing the plastic rivet on the outer edge using a small screwdriver, then unclip the two indicated panels and unscrew the two screws inside. Once done, also remove the internal cover of the rear-view mirror, and if needed, use a plastic spatula to unclip the panel from the door starting from the bottom. Finally, disconnect the lock cable and the window regulator connector.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel from a Kia Sportage?
How to Remove the Door Panel from a Kia Sportage?
Kia Sportage (2021-2026 / MK 5, NQ5) Removing the door panel from a Kia Sportage involves loosening the only two screws that secure it to its housing: first, detach the plastic panel cov…
How to Remove the Inner Door Panel of the Kia Sportage
How to Remove the Inner Door Panel of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Follow the instructions below to see the steps on how to remove the front door panel of the Kia Sportage. First, open the front door of the vehicle a…
How do you open the fuel door of a Kia Sportage?
How do you open the fuel door of a Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) Good morning, today we are here to open the fuel door of our Kia Sportage. Let's start by getting out of the car. After that, we will need to continu…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos