Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2020 Kia Rio

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Tire pressure warning light

In this new mini guide dedicated to your fourth series Kia Rio (2020), learn how to correctly and manually reset the TPMS light that appears on your car's dashboard. First, enter the vehicle and turn on the ignition only. Then, as advised by the instructions on the display, locate the "Set" button on the lower side of the dashboard and hold it for about three seconds. Once the light goes out, release the button and turn off the ignition.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tyre pressure warning light on the Kia Rio
Resetting the tyre pressure warning light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
How to reset the tire pressure warning light on the Kia RIO
How to reset the tire pressure warning light on the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…
Resetting the Tyre Pressure Warning Light on the Kia Rio
Resetting the Tyre Pressure Warning Light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) In this guide, learn how to reset the tyre pressure warning light on the Kia Rio. Before performing the reset operation, ensure that all four tyres a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos