Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Spark plugs

In order to replace the spark plug of the KTM Duke 390, you need to remove the ignition coil from the top of the engine block cylinder, accessing it from the right side of the motorcycle: once this coil has been disconnected, you will be able to locate the underlying spark plug, which can be removed from its seat using the appropriate socket wrench. Once the old spark plug has been removed, you can then insert the new one into the cylinder: once it has been inserted, you will need to reconnect the coil and check that everything is functioning properly.

Posted on 6 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the spark plug of the KTM Duke 390
How to disassemble and replace the spark plug of the KTM Duke 390
Duke 390 Today we will see the process of disassembling and replacing the spark plug of the engine of the KTM Duke 390, in simple and quick steps. First, we p…
How to change the spark plug of the KTM Duke 390
How to change the spark plug of the KTM Duke 390
Duke 390 Today's main instructions will show us how to disassemble and replace the spark plug of the KTM Duke 390 motorcycle, in simple steps. First, we put t…
How to replace the spark plug in the KTM Duke 390?
How to replace the spark plug in the KTM Duke 390?
Duke 390 In this tutorial we can see how to replace the spark plug in the KTM Duke 390, an extremely simple and quick operation. First of all, make sure that …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos