Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the process of disassembling and replacing the display cover of the instrument panel of the KTM Super Duke 1290 R motorcycle. First of all, we put the motorcycle on the stand and start disassembling our instrument panel, unscrewing the fixing screws and disconnecting the electrical connector; once removed, it will be possible to unscrew the rear screws to remove the cover and the display, as shown in the video. At this point, we install the new display cover of the instrument panel, fixing it correctly with the screws; all that's left is to reassemble the instrumentation on the motorcycle!

Posted on 8 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a KTM Super Duke 1290 R
How to Reset the Service Light on a KTM Super Duke 1290 R
Super Duke 1290 R This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you …
How to Replace the Exhaust on the KTM Super Duke 1290 R?
How to Replace the Exhaust on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the exhaust on the KTM Super Duke 1290 R, loosen the screws securing the plastic protection panel located at the bottom of the exhaust. On…
How do you replace the clutch on the KTM Super Duke 1290 R?
How do you replace the clutch on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the clutch of the KTM Super Duke 1290 R, you need to loosen the screws that secure the cover panel located on the right side of the bike: …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos