Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the KTM Super Duke 1290?

Model: Ktm Super Duke 1290 R
Part: Brake pads

Video tutorial

To replace the rear brake pads on the KTM Super Duke 1290, you need to loosen the central nut that secures the brake caliper to the disc: this will allow the caliper to be detached from the disc once the nut is loosened. You can then remove the pads from inside and replace them with new spare parts; once the new pads are inserted, reposition the brake caliper onto the disc and secure it with the appropriate pin. After installation, check that the brake functions correctly.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
Super Duke 1290 R Below are the instructions that will allow you to remove and replace the front brake pads on a KTM Super Duke 1290 R motorcycle. First, place the mot…
How to Replace the Front Brake Pads on the Harley Davidson Super Duke 1290?
How to Replace the Front Brake Pads on the Harley Davidson Super Duke 1290?
Super Duke 1290 R You can replace the front brake pads on the Harley Davidson Super Duke 1290 by loosening the screws that secure the brake caliper to the correspondin…
Replacing rear brake pads on KTM SuperDuke 1290 R
Replacing rear brake pads on KTM SuperDuke 1290 R
Super Duke 1290 R In today's video, you will see how to remove and replace the rear brake pads on a KTM SuperDuke 1290 R. First, remove the retaining clip of the pads …

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos