Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing rear brake pads on KTM SuperDuke 1290 R

Model: Ktm Super Duke 1290 R
Part: Brake pads

Video tutorial

In today's video, you will see how to remove and replace the rear brake pads on a KTM SuperDuke 1290 R. First, remove the retaining clip of the pads using a pair of pliers; then remove the central pin by tapping it out. Next, use a screwdriver or Torx key to remove the screws from the brake caliper; then take off the brake caliper from the disc and remove the old pads.

Before refitting the caliper, clean it of carbon residues and push back the piston inside the caliper.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Removing the Front Headlight from a KTM SuperDuke 1290 R
Removing the Front Headlight from a KTM SuperDuke 1290 R
Super Duke 1290 R In today's video tutorial, we will see how to remove the front headlight from a KTM SuperDuke 1290 R. First, unscrew the fastening screws found on th…
How to Replace the Rear Brake Pads on the KTM Super Duke 1290?
How to Replace the Rear Brake Pads on the KTM Super Duke 1290?
Super Duke 1290 R To replace the rear brake pads on the KTM Super Duke 1290, you need to loosen the central nut that secures the brake caliper to the disc: this will a…
How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
Super Duke 1290 R Below are the instructions that will allow you to remove and replace the front brake pads on a KTM Super Duke 1290 R motorcycle. First, place the mot…

How to Dismantle the Engine of the TM Racing MX 125?

To dismantle the engine of the TM Racing MX 125, loosen the screws securing the side casing of the bike so that it can be removed, providing access to the clutch. Next, remove the spark plug from the top of the cylinder, then loosen the screws securing the cylinder as well: after removing the cylinder, you will be able to locate the piston underneath, which must be freed from the conrod by expanding its retaining ring. At this point, all further components within the engine block can be removed and replaced with new ones.

Watch the video!


by ScegliAuto

More videos