Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Super Duke 1290 R
Part:

In this video tutorial, you will learn how to remove and replace the brake and clutch levers on a KTM Super Duke 1290 R, following the instructions below. First, remove the brake lever guard by unscrewing the central pin; then replace it with the new one of the correct type, adjusting the lever's travel. Next, follow the same procedure for removing the clutch lever; in this case, disconnect the steel cable to replace the lever, following the video tutorial to the end!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in a KTM Super Duke 1290
How to Replace the Coolant in a KTM Super Duke 1290
Super Duke 1290 R Follow the main instructions on how to drain and replace the coolant or antifreeze in the KTM Super Duke 1290 motorcycle. First, place your bike on a…
How do you replace the clutch on the KTM Super Duke 1290 R?
How do you replace the clutch on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the clutch of the KTM Super Duke 1290 R, you need to loosen the screws that secure the cover panel located on the right side of the bike: …
Removing the Rear Wheel on KTM Super Duke R 1290
Removing the Rear Wheel on KTM Super Duke R 1290
Super Duke 1290 R In today's video, we'll see how to remove the rear wheel from a KTM Super Duke 1290 R. To remove it, first take off the retaining ring found on the w…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos