Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the air filter of the KTM 1290 Super Adventure by loosening the screws that secure the fuel tank and seat: once these screws have been removed, it will be possible to detach both components, also disconnecting their corresponding connectors. After removal, it will be possible to access the screws that secure the cover of the relevant filter box underneath: by loosening these screws, it will be possible to remove the cover and slide out the air filter located inside. After removal, the new filter can be inserted and everything closed by reinserting the removed parts.

Posted on 20 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the KTM 1290 Super Adventure R?
How to reset the service on the KTM 1290 Super Adventure R?
1290 Super Adventure R In this tutorial, we will see how to reset the service on the KTM 1290 Super Adventure R, a very simple and quick operation that should be done only …
How to Replace the Coolant in a KTM 1290 Super Adventure R
How to Replace the Coolant in a KTM 1290 Super Adventure R
1290 Super Adventure R The instructions in this guide will show you how to bleed and top up the coolant in the engine of the KTM 1290 Super Adventure motorcycle. First, pla…
How to Reset the Service Light on a KTM 1290 Super Adventure R?
How to Reset the Service Light on a KTM 1290 Super Adventure R?
1290 Super Adventure R In this tutorial, you will see how to reset the service light on a KTM 1290 Super Adventure R, a very simple and quick operation to perform only afte…

How to Replace the Front Headlight Bulb on the Suzuki GS 500?

In this tutorial, you will see how to replace the front headlight bulb on the Suzuki GS 500, a very simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely. Start by positioning yourself in front of the headlight in question, then locate the two screws at the bottom and unscrew them with a cross-head screwdriver. Next, separate the headlamp from the bracket, disconnect the power connector, and remove the rubber cap. At this point, simply unclip the metal clip, extract the old bulb, and fit the replacement.

Watch the video!


by ScegliAuto

More videos