Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 200
Part: Wheel

The following steps will show us how to disassemble and replace the rear wheel or tire of the KTM Duke 200 motorcycle. First, we put the motorcycle on the stand and proceed to lift the rear wheel off the ground; then we use a socket wrench with an extension to unscrew the central bolt of the wheel, removing the central axle, as shown in the video. At this point, we disconnect the wheel from the brake caliper and the chain drive; it will be possible to replace the tire or the brake disc if necessary, finally reassembling the wheel and adjusting the chain tension!

Posted on 14 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on the KTM Duke 200
How to Replace the Brake Pads on the KTM Duke 200
Duke 200 To replace the brake pads on the KTM Duke 200, you must perform the same operation for both the front and rear wheels: loosen the bolts that secure t…
How to Replace the Front Indicator Bulb on a KTM Duke 200?
How to Replace the Front Indicator Bulb on a KTM Duke 200?
Duke 200 To replace the front indicator bulb on a KTM Duke 200, first loosen the screws located at the back of the handlebars to lower the front fairing of th…
How to Replace the Battery on a KTM Duke 200
How to Replace the Battery on a KTM Duke 200
Duke 200 In this video tutorial, learn how to remove and replace the battery on a KTM Duke 200, following the instructions below. First, remove the passenger …

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos