Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Posted on 12 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Kymco Xciting S 400i?
How to Replace the Exhaust on a Kymco Xciting S 400i?
Xciting S 400i To replace the exhaust on the Kymco Xciting S 400i, loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel on…
How to Replace the Exhaust on a Kymco Xciting S 400i
How to Replace the Exhaust on a Kymco Xciting S 400i
Xciting S 400i You can replace the exhaust on a Kymco Xciting S 400i by loosening the screws that secure the exhaust tip to its housing, located near the rear wheel…
How do you replace the exhaust pipe of the Kymco Xciting S 400i?
Xciting S 400i The replacement of the exhaust pipe of the Kymco Xciting S 400i is done by loosening the screws that fix the terminal from the exhaust to its housing…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos