|
Do it yourself
| |||
| ||||
Model: Ktm Duke 200
In order to replace the spark plug of the KTM Duke 200, you need to disconnect the coil connected to the top of the engine block: once the coil is disconnected, you can access the spark plug below. The spark plug can be removed from its housing using the appropriate socket wrench: this way you can insert the new replacement spark plug into the top of the cylinder. It can be properly secured with the socket wrench and you can reconnect the coil, making sure everything works correctly.
Posted on 26 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Duke 200
To replace the gear lever on a KTM Duke 200, locate it on the right side of the bike, near the footpeg at the lower central part. To remove it, loose…
Duke 200
In this guide, find the main instructions to remove and replace the dipped beam bulb of the front headlight on a KTM Duke 200. First, place the motor…
Duke 200
To replace the clutch on the KTM Duke 200, loosen the screws securing the specific cover located on the right side of the bike, at the lower centre. …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
