Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will see how to reset the service light on the KTM Duke 890, as well as on the 790 and Adventure versions. We will use the keypad located on the left handlebar, the one with the arrows that go in four directions: we enter the menu with the "set" button, and moving with the arrows up/down we go to "trips & data", and from there we go down to the "settings" option, but without entering the submenu. When we are on this option, we must press the "up and down" buttons simultaneously for about five seconds, until a screen appears showing the service parameters: kilometers and months remaining until the service itself. Using the "set" button, change the time and mileage data, then press and hold the "set" button; the screen will go back and we are done.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the KTM 890 Duke R
How to Reset the Service Light on the KTM 890 Duke R
Duke 890 R Follow this procedure to easily perform a manual reset of the service light on your KTM 890 Duke R. First, switch off the engine and leave only the i…
How to reset the oil service on the KTM Duke 890?
How to reset the oil service on the KTM Duke 890?
Duke 890 R In this tutorial we can see how to replace the motor oil in the KTM Duke 890, an extremely simple and fast operation. First of all, we wait for the e…
How to Reset the Service Light on a KTM Duke 890 R
How to Reset the Service Light on a KTM Duke 890 R
Duke 890 R If you don't know how to reset the service light on your KTM Duke 890 R, don't worry as below you will find all the instructions you need. First, pla…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos