Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the cruise control of the KTM 1290 Superduke R

Model: Ktm 1290 Super Duke R
Part: Onboard computer

Video tutorial

Let's see how to reset the cruise control of the KTM 1290 SuperDuke R: it is an operation that is done by pressing a sequence of buttons: we must press and hold, one after the other for about three seconds, these three buttons: the order is fundamental: first the "+" button to increase the speed; second the "-" button to decrease the speed; third the "set" button on the back of the cruise control lever.

After completing the sequence of the three buttons, gently rotate the throttle lever forward: we will feel a slight resistance before it reaches the end of its travel.

At this point, the flashing light on the dashboard should turn off or return to steady, indicating that the cruise control has been reset and is operational again.


Posted on 5 October 2025 by ScegliAuto


Related tutorials

How to reset the service on the KTM 1290 Super Duke?
How to reset the service on the KTM 1290 Super Duke?
1290 Super Duke R In this tutorial, we can see how to reset the service on the KTM 1290 Super Duke, an extremely simple and quick operation, to be done only once all s…
How to Remove the Front Wheel of the KTM 1290 Super Duke
How to Remove the Front Wheel of the KTM 1290 Super Duke
1290 Super Duke R The steps in this guide will show you how to remove and replace the front wheel of the KTM 1290 Super Duke motorcycle. First, put down the side stand…
How to Reset the Service on the KTM 1290 Super Duke R?
How to Reset the Service on the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, you will learn how to reset the service on the KTM 1290 Super Duke R, a very simple and quick operation. Before doing this, ensure …

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos