Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The steps in this guide will show you how to remove and replace the front wheel of the KTM 1290 Super Duke motorcycle. First, put down the side stand and start positioning the front stand to lift the wheel off the ground; then loosen the ABS sensor bolt and unscrew the bolts of the front brake calipers, removing them from the discs, as shown in the video. At this point, unscrew the central axle of the wheel to gently remove it, replacing the front tyre if necessary; reassemble and adjust everything correctly!

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery of the KTM 1290 Super Duke R?
How to replace the remote battery of the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, you will see how to replace the remote battery of the KTM 1290 Super Duke R, a very simple and quick operation. You will only need …
How to Replace the Battery in the KTM 1290 Super Duke R?
How to Replace the Battery in the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, see how to replace the battery in the KTM 1290 Super Duke R, a very simple and quick operation. First, ensure the key is not in the…
How to Change the Engine Oil on a KTM 1290 Super Duke?
How to Change the Engine Oil on a KTM 1290 Super Duke?
1290 Super Duke R You can change the engine oil on a KTM 1290 Super Duke by loosening the drain plug located at the central lower part of the vehicle: once this plug i…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos