Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to replace the headlight bulb on the KTM 1290 Super Duke R, a very simple and quick operation. First, let's make sure that the key is not inserted, to operate safely. Then, we locate the two screws on the sides of the headlight and unscrew them using a Torx T30 key. Next, we separate the headlight from the mount, disconnect the power connector, and remove the circular rubber cover. At this point, all that’s left is to unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a KTM 1290 Super Duke?
How to Change the Engine Oil on a KTM 1290 Super Duke?
1290 Super Duke R You can change the engine oil on a KTM 1290 Super Duke by loosening the drain plug located at the central lower part of the vehicle: once this plug i…
How to Remove the Front Wheel of the KTM 1290 Super Duke
How to Remove the Front Wheel of the KTM 1290 Super Duke
1290 Super Duke R The steps in this guide will show you how to remove and replace the front wheel of the KTM 1290 Super Duke motorcycle. First, put down the side stand…
How to Reset the Service on the KTM 1290 Super Duke R?
How to Reset the Service on the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, you will see how to reset the service on the KTM 1290 Super Duke R, an extremely simple and quick operation to perform only after c…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos