Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the KTM 1290 Super Duke R?

Model: Ktm 1290 Super Duke R
Part: Battery

Video tutorial

In this tutorial, see how to replace the battery in the KTM 1290 Super Duke R, a very simple and quick operation. First, ensure the key is not in the ignition, then open the passenger seat, locate the indicated cord, and pull it towards you to unlock the rider's seat.

Next, remove the block containing the ECU, unscrew the support bracket bolt with a Torx T30 spanner, and starting with the negative terminal, disconnect both terminals. At this point, you can extract the battery from the housing, insert the replacement, and follow the reverse procedure.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to replace the remote battery of the KTM 1290 Super Duke R?
How to replace the remote battery of the KTM 1290 Super Duke R?
1290 Super Duke R In this tutorial, you will see how to replace the remote battery of the KTM 1290 Super Duke R, a very simple and quick operation. You will only need …
How to replace the battery of the key for the KTM 1290 Super Duke R
How to replace the battery of the key for the KTM 1290 Super Duke R
1290 Super Duke R If you own a KTM 1290 Super Duke R and want to learn how to correctly replace the battery in the key, all you have to do is read the following instru…
How to Remove the Front Wheel of the KTM 1290 Super Duke
How to Remove the Front Wheel of the KTM 1290 Super Duke
1290 Super Duke R The steps in this guide will show you how to remove and replace the front wheel of the KTM 1290 Super Duke motorcycle. First, put down the side stand…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos