Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 125
Part: Engine oil

To change the motor oil of the KTM Duke 125, make sure the motorcycle is positioned on a flat and stable surface, preferably using a central or side stand. Start the engine for a couple of minutes, so the oil warms up and becomes more fluid, making it easier to drain. After turning off the engine, locate the drain plug located at the bottom of the engine. With a container under the engine, carefully unscrew the drain plug with a suitable wrench and let the used oil drain completely. Once the oil has drained, make sure there are no more residues inside the engine, tilting the motorcycle slightly if necessary. After letting the oil drain, clean the drain plug and its gasket thoroughly, ensuring they are in good condition to prevent any leaks. Carefully screw the plug back in place, without tightening it excessively. Now, locate the oil filler cap, usually located on the side of the engine. Using a clean funnel, pour the correct amount of new oil, following the manufacturer's specifications. Once finished, replace the filler cap and start the engine for a few minutes to circulate the new oil.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Duke 125 This guide illustrates how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Duke 125 motorcycle. Firs…
How to Reset the Oil Light on the KTM Duke 125
How to Reset the Oil Light on the KTM Duke 125
Duke 125 If you own a KTM Duke 125 and want to learn how to manually reset the oil light, follow these steps carefully. First, turn on the ignition of your KT…
How to Change the Engine Oil in the KTM Duke 125?
How to Change the Engine Oil in the KTM Duke 125?
Duke 125 In this tutorial, see how to change the engine oil in the KTM Duke 125, a very simple and quick operation. First, ensure that the engine is cool enou…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos