Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the KTM Duke 125?

Model: Ktm Duke 125
Part: Engine oil

Video tutorial

To change the engine oil of the KTM Duke 125, unscrew the drain plug located at the bottom of the bike on the right side. Collect all the oil that flows out into a suitably positioned container.

Once the oil has fully drained, close the drain plug and remove the old oil filter from its housing under the engine cover on the right side of the bike. Finally, refill by pouring new oil into the engine cover located on the right side of the bike.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM Duke 125?
How to Change the Engine Oil in the KTM Duke 125?
Duke 125 In this tutorial, see how to change the engine oil in the KTM Duke 125, a very simple and quick operation. First, ensure that the engine is cool enou…
Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Replace the Engine Oil and Oil Filter on the Ktm Duke 125
Duke 125 This guide illustrates how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Duke 125 motorcycle. Firs…
How to Change the Engine Oil on the KTM Duke 125?
How to Change the Engine Oil on the KTM Duke 125?
Duke 125 To change the engine oil on the KTM Duke 125, loosen the drain plug of the oil sump, located at the central lower part of the bike: by unscrewing thi…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos