Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the battery from the KTM Duke 390?

Model: Ktm Duke 390
Part: Battery

Video tutorial

All KTM motorcycles of the Duke model, not just the 390, have their power battery installed in the compartment under the seat, which is one of the most commonly used locations for motorcycles of other brands as well. In the tutorial video available to us, we can clearly see how to replace the aforementioned battery, so let's proceed: First, unfasten the rear seat latch by inserting the key into the cylinder and turning it to the left.

Then, unscrew the fastening pins of the remaining part of the seat, unfasten the battery lock strap, and disconnect the negative and positive cables. After that, you can remove the old battery and install the new one.


Posted on 10 December 2025 by ScegliAuto


Related tutorials

How to Remove the Battery from a KTM Duke 390
How to Remove the Battery from a KTM Duke 390
Duke 390 Before you begin, position your KTM Duke 390 on its stand. Start by removing the seat using the motorcycle key, then unclip and take it off. Next, pu…
How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
Duke 390 Let's discover in this video how to perform the routine maintenance oil change on a KTM Duke 390 by following these simple steps. First, position you…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos