Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a KTM Duke 390

Model: Ktm Duke 390
Part: Battery

Video tutorial

Before you begin, position your KTM Duke 390 on its stand. Start by removing the seat using the motorcycle key, then unclip and take it off. Next, pull the latch that unlocks the battery cover, then remove the battery cover itself.

This will give you access to the exhausted battery. Proceed to disconnect the electrical connectors, then unclip the battery securing strap.

Once you complete this step, you can extract and remove the battery from its housing, successfully finishing the disassembly.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How do you remove the battery from the KTM Duke 390?
How do you remove the battery from the KTM Duke 390?
Duke 390 All KTM motorcycles of the Duke model, not just the 390, have their power battery installed in the compartment under the seat, which is one of the mo…
How to Remove the Front Wheel and Brake Caliper on a Ktm Duke 390
How to Remove the Front Wheel and Brake Caliper on a Ktm Duke 390
Duke 390 In today's tutorial video, you will learn how to remove and replace the front wheel and how to take off the brake caliper (for pad replacement) on a …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos