Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Brake Pads on a KTM RC 390

Model: Ktm Rc 390
Part: Brake pads

Video tutorial

In this guide, you will learn how to disassemble and replace the front and rear brake pads on the KTM RC 390 motorcycle. First, place the motorcycle on a stand and begin by removing the central pin of the brake caliper; then remove the old pads located inside by pressing the caliper piston to retract it. At this point, clean the inside of the caliper from any residual dirt, then install the new original brake pads; reassemble the pin to secure the pads in the caliper, replacing the other brake pads in the same manner.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the KTM RC 390?
How do you replace the front brake pads of the KTM RC 390?
Rc 390 It will be possible to replace the front brake pads of the KTM RC 390 by loosening the screws that secure the brake caliper corresponding to the disc…
Replace Rear Brake Pads on KTM RC 390
Replace Rear Brake Pads on KTM RC 390
Rc 390 In this video tutorial, we will see how to remove and replace the rear brake pads on a KTM RC 390 motorcycle, but also on the 125. First, obtain the …
How do you replace the front brake pads of the KTM RC 390?
How do you replace the front brake pads of the KTM RC 390?
Rc 390 In order to replace the front brake pads of the KTM RC 390, you will need to loosen the screws that secure the brake caliper to the corresponding dis…

How to Set the Time on a Piaggio Vespa VXL 125 Scooter?

In this tutorial, you will learn how to set the time on a Piaggio Vespa VXL 125 scooter, a very simple and quick operation, for example, after switching to daylight saving time or after disconnecting the battery. First, insert the key, then turn on the instrument panel; it is not necessary to start the engine. Press and hold the "MODE" button until the clock starts flashing. At this point, change the hour by repeatedly pressing the same button, hold it down to switch to minutes, and similarly adjust them before saving the setting.

Watch the video!


by ScegliAuto

More videos