Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the KTM RC 390?

Model: Ktm Rc 390
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads of the KTM RC 390 by loosening the screws that secure the brake caliper corresponding to the disc: once the brake caliper has been detached from the disc, it will be possible to proceed by levering with an object to remove the pads from their housing.

Once the old pads have been removed, it will be possible to insert the new ones in their place: it will now be possible to reattach the brake caliper to the corresponding disc in order to verify that the brake is working correctly.


Posted on 28 April 2025 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the KTM RC 390?
How do you replace the front brake pads of the KTM RC 390?
Rc 390 In order to replace the front brake pads of the KTM RC 390, you will need to loosen the screws that secure the brake caliper to the corresponding dis…
How to Replace the Front Brake Pads on a KTM RC 390?
How to Replace the Front Brake Pads on a KTM RC 390?
Rc 390 To replace the front brake pads on a KTM RC 390, loosen the bolts securing the brake caliper to its housing on the disc: once the bolts are loosened,…
How to Replace the Front Brake Pads on the KTM RC 390?
How to Replace the Front Brake Pads on the KTM RC 390?
Rc 390 In this tutorial, you will learn how to replace the front brake pads on the KTM RC 390, a task that is extremely simple and quick. First, position yo…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos