Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Ktm 125
Part: Engine oil

In this short video, learn how to change the engine oil on your KTM 125. First, place a container under the bike to collect the used oil. Using a spanner, remove the bolt that acts as the oil drain plug and filter, and clean it with a bit of motorcycle fuel. After draining all the oil, refit the drain plug and remove the container with the used oil (make sure to dispose of the used oil at proper recycling centres or with a mechanic). Finally, pour in the new oil through the oil filler cap.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a KTM 125
Ktm 125 Today, I will show you how to change the engine oil on your KTM 125. Anyone can do it with a bit of effort. To drain the oil, unscrew the oil drain p…
How to Reset the Service on a KTM Duke 125?
Ktm 125 Resetting the service on a KTM Duke 125, as shown in this tutorial, is an extremely simple and quick operation. First, insert the key and turn on the…
How to Reset the Service on a KTM 125?
How to Reset the Service on a KTM 125?
Ktm 125 In this tutorial, you will see how to reset the service on a KTM 125, a very simple and quick operation to perform only after completing all required…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos