Do it yourself
Frequently asked questions about cars and motorcycles

Removing Rear Wheel from KTM Duke 390

Model: Ktm Duke 390
Part: Wheel

Video tutorial

Below, we will see the instructions to remove and detach the rear wheel of the KTM Duke 390. First, place the motorcycle on a stand and start loosening the central wheel bolt using the appropriate socket wrench; then unscrew the screws of the brake caliper, disconnecting the wheel from the drive chain to remove it, as shown in the video.

At this point, if necessary, replace the tyre or the sprocket, balancing the wheel if needed; reposition the chain and reassemble the brake caliper.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

Duke 390 Today, we will go through the instructions to remove and replace the rear wheel or tyre of the Ktm Duke 390 motorcycle. First, place the motorcycle o…
Duke 390 It will be possible to replace the brake pads on the KTM Duke 390 by performing the same operation for both the front and rear wheels: it will be nec…
Duke 390 To install the mirrors on the KTM Duke 390, first loosen the screws that secure the weights located at the end of the grips. Once the weights are rem…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos