Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear wheel of the Ktm Duke 390

Model: Ktm Duke 390
Part: Wheel

Video tutorial

Today, we will go through the instructions to remove and replace the rear wheel or tyre of the Ktm Duke 390 motorcycle. First, place the motorcycle on a stand and lift the rear wheel off the ground using the appropriate stand.

Then, undo the bolts securing the brake caliper to remove it. Next, unscrew the central axle of the wheel, disconnecting the chain from the sprocket to remove it. Replace the rear tyre if necessary, or replace the brake disc or sprocket, then reassemble and securely fasten the rear wheel.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Removing Rear Wheel from KTM Duke 390
Removing Rear Wheel from KTM Duke 390
Duke 390 Below, we will see the instructions to remove and detach the rear wheel of the KTM Duke 390. First, place the motorcycle on a stand and start looseni…
How to Replace the Rear Wheel on a KTM Duke 390
How to Replace the Rear Wheel on a KTM Duke 390
Duke 390 Below is a guide on how to remove and replace the rear wheel on a KTM Duke 390, following the instructions provided. First, place the stand on your b…
How to Replace the Exhaust on a KTM Duke 390?
Duke 390 To replace the exhaust on a KTM Duke 390, loosen the screws securing the exhaust terminal to its housing: this is located on the right side of the bi…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos