Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the brake pads of the KTM Duke 390?

Model: Ktm Duke 390
Part: Brake pads

Video tutorial

It will be possible to replace the brake pads on the KTM Duke 390 by performing the same operation for both the front and rear wheels: it will be necessary to loosen the screws that secure the calipers to the respective discs and then remove the locking pins of the pads.

At this point, it will be possible to remove them from inside the calipers in order to insert the new replacement pieces: after installation, it will be possible to reattach the calipers to the disc.

Once the insertion of the pads and calipers is complete, it will be necessary to verify that the brakes are functioning.


Posted on 19 April 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a KTM Duke 390?
How to Replace the Front Brake Pads on a KTM Duke 390?
Duke 390 You can replace the front brake pads on a KTM Duke 390 by loosening the screws that secure the caliper to the corresponding disc. Once the caliper is…
How to Replace the Front Brake Pads on KTM Duke 125-390
How to Replace the Front Brake Pads on KTM Duke 125-390
Duke 390 In today's video, you will see how to remove and replace the front brake pads, as well as check and possibly replace the brake fluid, on a KTM Duke 3…
How to Replace the Rear Brake Pads on a KTM Duke 390
How to Replace the Rear Brake Pads on a KTM Duke 390
Duke 390 This video shows the main steps to remove and replace the rear brake pads on a KTM Duke 390, as well as the 125. To remove the old brake pads, you ne…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos