|
Do it yourself
| |||
| ||||
How to Replace the Rear Brake Pads on a KTM Duke 390
Model: Ktm Duke 390
Video tutorial
This video shows the main steps to remove and replace the rear brake pads on a KTM Duke 390, as well as the 125. To remove the old brake pads, you need to take out the central fixing pin that holds the pads in place; use pointed pliers to remove the retaining clip and pull out the pin by tapping from one side, as shown in the video. At this point, you can remove the old brake pads from the caliper and replace them with new ones; clean the caliper and push the piston back to facilitate insertion!
Updated on 3 May 2026 by ScegliAuto
Related tutorials
Duke 390
In today's video, you will see how to remove and replace the front brake pads, as well as check and possibly replace the brake fluid, on a KTM Duke 3…
Duke 390
You can replace the front brake pads on a KTM Duke 390 by loosening the screws that secure the caliper to the corresponding disc. Once the caliper is…
Duke 390
In today's tutorial video, you will learn how to remove and replace the front wheel and how to take off the brake caliper (for pad replacement) on a …
|
How to Reset the Service Light on a Vespa Sprint 150?
To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
