|
Do it yourself
| |||
| ||||
How to Replace the Front Brake Pads on KTM Duke 125-390
Model: Ktm Duke 390
Video tutorial
In today's video, you will see how to remove and replace the front brake pads, as well as check and possibly replace the brake fluid, on a KTM Duke 390, but also on the 125. First, unscrew the bolts securing the central pin of the caliper to remove the metal stop; then you will be able to remove the brake pads, as shown in the video. At this point, clean the caliper of carbon residues before reassembling everything; push back the caliper piston to insert the new pads!
Updated on 14 April 2026 by ScegliAuto
Related tutorials
Duke 390
This video shows the main steps to remove and replace the rear brake pads on a KTM Duke 390, as well as the 125. To remove the old brake pads, you ne…
Duke 390
You can replace the front brake pads on a KTM Duke 390 by loosening the screws that secure the caliper to the corresponding disc. Once the caliper is…
Duke 390
To replace the rear brake pads on the KTM Duke 390, loosen the bolts securing the brake caliper so that it can be detached from the disc. Once the ca…
|
How to Reset the Service Light on a Vespa Sprint 150?
To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
