Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Brake pads

You can replace the front brake pads on a KTM Duke 390 by loosening the screws that secure the caliper to the corresponding disc. Once the caliper is removed, slide the pin out of its housing to take the pads out from inside the caliper. At this point, insert the new pads into their housing so that the caliper can be repositioned onto the disc. Finally, check that the entire system functions correctly after installation.

Posted on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a KTM Duke 390?
How to Replace the Brake Pads on a KTM Duke 390?
Duke 390 The procedure for replacing the brake pads on a KTM Duke 390 is the same for both the front and rear brakes. You will need to unscrew the bolt that s…
How to Remove the Front Wheel and Brake Caliper on a Ktm Duke 390
How to Remove the Front Wheel and Brake Caliper on a Ktm Duke 390
Duke 390 In today's tutorial video, you will learn how to remove and replace the front wheel and how to take off the brake caliper (for pad replacement) on a …
How to Replace the Rear Brake Pads on the KTM Duke 390
Duke 390 To replace the rear brake pads on the KTM Duke 390, loosen the bolts securing the brake caliper so that it can be detached from the disc. Once the ca…

How to change the engine oil on a Sym Elite 50?

To change the engine oil on a Sym Elite 50, start by placing the scooter on a flat surface and ensure the engine is warm, not hot. Locate the oil drain plug on the engine and position a collection container underneath it. Unscrew the drain plug and let the used oil flow into the container. Once the drainage is complete, re-tighten the drain plug. Next, locate the oil filler cap on the engine and remove it. Use a funnel to pour new oil into the tank, being careful not to exceed the recommended level. Once the new oil is added, re-tighten the filler cap. Ensure both caps are securely fastened. Start the scooter for a few minutes to allow the oil to circulate in the engine. Finally, turn off the scooter, and you will have completed the oil change.

Watch the video!


by ScegliAuto

More videos