Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a KTM Duke 390?

Model: Ktm Duke 390
Part: Brake pads

Video tutorial

The procedure for replacing the brake pads on a KTM Duke 390 is the same for both the front and rear brakes. You will need to unscrew the bolt that secures the caliper to the disc using a socket spanner: once the bolt is removed, detach the caliper from the disc and slide out the pads inside it. This will allow you to insert the new pads into the caliper and position it back onto the appropriate disc.

After positioning it, secure it in place by tightening the appropriate bolt.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on KTM Duke 125-390
How to Replace the Front Brake Pads on KTM Duke 125-390
Duke 390 In today's video, you will see how to remove and replace the front brake pads, as well as check and possibly replace the brake fluid, on a KTM Duke 3…
How to Replace the Front Brake Pads on a KTM Duke 390?
How to Replace the Front Brake Pads on a KTM Duke 390?
Duke 390 You can replace the front brake pads on a KTM Duke 390 by loosening the screws that secure the caliper to the corresponding disc. Once the caliper is…
How to Replace the Rear Brake Pads on the KTM Duke 390
Duke 390 To replace the rear brake pads on the KTM Duke 390, loosen the bolts securing the brake caliper so that it can be detached from the disc. Once the ca…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos