|
Do it yourself
| |||
| ||||
How to Replace the Rear Brake Pads on a KTM Duke 200
Model: Ktm Duke 200
Video tutorial
Below, we will discover how to remove and replace the rear brake pads on the KTM Duke 200. First, place the bike on a stand and begin unscrewing the bolts of the brake caliper, removing the pad pin; then, apply pressure to the caliper piston to extract the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, install the new original brake pads, and reassemble the pad locking pin, following the video tutorial to the end!
Posted on 16 June 2026 by ScegliAuto
Related tutorials
Duke 200
In this brief and simple guide, you will learn how to remove and replace the rear brake pads on the Ktm Duke 200 motorcycle, following the instructio…
Duke 200
To replace the brake pads on the KTM Duke 200, you must perform the same operation for both the front and rear wheels: loosen the bolts that secure t…
Duke 200
In this tutorial we can see how to replace the rear brake pads on the KTM Duke 200, an extremely simple and quick operation. First of all, position y…
|
How to Replace the Air Filter on the BMW F650 GS?
To replace the air filter on the BMW F650 GS, loosen the screws securing the panel located at the centre of the fuel tank. Once the screws are loosened, you can completely detach the panel and locate the air filter box underneath. This can now be opened to extract the air filter inside. Replace it with a new spare part, then refit the panel and check that everything is functioning correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |