Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 200
Part: Brake pads

In this brief and simple guide, you will learn how to remove and replace the rear brake pads on the Ktm Duke 200 motorcycle, following the instructions below. First, place your motorcycle on a stand and start unscrewing the bolts securing the rear brake caliper; remove the locking pin of the pads to take them out of the caliper, as shown in the video. At this point, clean the caliper of dirt, then install the new pads (of excellent quality); all that’s left is to refit the brake caliper, following the video to the end!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a KTM Duke 200
How to Replace the Rear Brake Pads on a KTM Duke 200
Duke 200 Below, we will discover how to remove and replace the rear brake pads on the KTM Duke 200. First, place the bike on a stand and begin unscrewing the …
How to Replace the Rear Brake Pads on a KTM Duke 200?
How to Replace the Rear Brake Pads on a KTM Duke 200?
Duke 200 In this tutorial, you will learn how to replace the rear brake pads on a KTM Duke 200, an extremely simple and quick operation. First, position yours…
How to replace the rear brake pads on the KTM Duke 200?
How to replace the rear brake pads on the KTM Duke 200?
Duke 200 .. In this tutorial we can see how to replace the rear brake pads on the KTM Duke 200, an extremely simple and quick operation. First.. …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos